Dell WD19/WD19S Cable Module USB-C Replacement YVYPW

Dell WD19/WD19S Cable Module

Product:

Genuine Original Dell product

Compatibility:

WD19

WD19S

Included:

1 x USB-C with Display logo Cable Module assembly

Dell P/N:

T70WN , YVYPW

Installation guide:

1) Turn the Dock so that the Dell Logo is pointing down and remove the two (2) Philips head screws from the cable module assembly.

2) Turn the Dock so that the Dell Logo is pointing up. Slide the cable assembly from the dock’s base a few millimeters until it stops.

3) Tilt the cable module up slightly.

4) Remove the cable module from the dock’s base.

5) Remove the new cable module from the shipping box.

6) Slide the new cable module down along the tracks on the dock’s base.

7) Slide the new cable module onto the dock’s base until it is fully seated.

8) Turn the dock so that the Dell Logo is pointing down again.

9) Reinstall the two (2) Philips head screws.